Car Alarms: 2004 Jeep Liberty car alarm, jeep liberty, liberty car

Question
We were awaken by a loud alarm coming from our 2004 Jeep Liberty. We couldn't shut it off using our remote. It's like a siren and the lights are flashing.My husband was able to disconnect the battery. What do you think we should do because this is the car our 17 year old drives and we don't want that to happen while the car is in the school parking lot or he is somewhere else. He wouldn't know what to do.Please help

Answer
Alrighty, It's an after market system so try this:

  You'll need to set off the alarm for a few seconds.
then, look under the dash area for a button or, a toggle
switch. When you locate it, turn on the ignition
key, press and hold in the button (little
spring loaded micro button, red or black possibly)
until the alarm chirps 1 time. This should over ride
the system, and only the keyless entry part,
if installed, would still be operating.
The LED (light emiting diode) light in the dash
should also go on solid.

At this point. the alarm would have reset.
If this had a starter kill relay installed,
it would now be opened, and the engine would
turn over when tried. This is override/reset.

You would repeat these steps to go back to
user mode but in your case, I'd leave it this
way until you can have a service technician
get under there and remove/replace & repair.
DO NOT leave this system in there or your
headache will get worse.

Let me know what you discover
& if you want to upgrade to a
better, more reliable system
that you understand from the beginning.

ALARMTEK
CARALARMSTORE.COM