QuestionQUESTION: hey guyz got a problem here , i've got a markx recently.try to install alarm for it but seems difficult because is the new one with push start button.is it possible to place alarm for my ride??? any idea???
ANSWER: Don't know the alarm, but from the notes I
have at my wirewerx, this is a relatively easy
installation. If yours is also a remote starter,
the 2003 through to the 2009 have Toyota's
transponder fuel rail cut off system and
would need a bypass kit to make it work.
But really, from what the note show
(available at www.wirewerx.com)
don't show any dificulties.
Starter kill can be done, so can remote start.
What's hanging you up on this?
ALARMTEK
---------- FOLLOW-UP ----------
QUESTION: i'm livin in a country with poor knowledge...they've said ,it is new ,don't know how to work on a push start...kinda have to go to the computer box of the car...i don't really know .is it possible to only place the sensors and not to reprogram the remote???
AnswerUnlikely. As I said, I don't know your alarm system,
but from experience, no half way installation goes well.
You would have to do a full installation to have it
perform as needed.
If the system came from here, and all equipment
was sold and sent from here, I could then
tell you for certain how it would interface.
But no way would I try to install the one you have
over the internet. No idea of the wiring etc...
I suggest you continue trying the stereo / car alarm
shops locally, or purchase a system here to
have me or, one of my technicians assist with
a "virtual" installation.
RM-ALARMTEK
