Car Alarms: 95 Camry Car Alarm, best buys, keyless entry

Question
Hello I have a 95 Camry that was purchased with a keyless entry alarm (I'm pretty sure it is the factory alarm).  I lost the keyless entry and the valet toggle switch is not working at all.  How can I disable the alarm so I can start the car?  I am hoping that I do not have to buy any manuals, etc.  I am confident we can execute the disarming process with your direction.  Thank you very much.

Answer
It's an after market system
from your description.
(valet switches do not exsist in
factory alarms/keyless entry.

Ok then, get over to the local car alarm shop,
or Best Buys will have a valet switch that
will fit for your
alarm.

In the mean time, cut off the switch part,
leaving the 2 wires that were connected, free.

Then twist together, turn on the ignition,
hold both wires to ground until the siren chirps.

That should reset and place the alarm into
over ride for now. Nothing accept the keyless entry
if installed will operate until you repeat the
same steps.

Then get a new switch and you're all set.

Have a good day.
Let me know if you were
successful.

ALARMTEK
CARALARMZ.COM