Car Alarms: Chapman Vehicle Security System, vehicle security system, valet mode

Question
The switch to put the system in valet mode is broken. It is a 3 wire switch with LED. Would you have a replacement switch?
Larry

Answer
Ok then, get over to the local car alarm shop,
or even a Circuit City or Best Buys will
have a valet switch that will fit for your
alarm.

In the mean time, locate the wires that were
connected and are hanging free.

Then twist together, turn on the ignition,
hold them to ground until the siren chirps.

That should reset and place the alarm into
over ride for now. Nothing accept the keyless entry
if installed will operate until you repeat the
same steps.

Then get a new switch and you're all set.

Have a good day.
Let me know if you were
successful.

ALARMTEK
CARALARMZ.COM