QuestionI have a Viper car alarm that has keyless entry, the ability to roll down the windows by pressing the II button, and a thing that won't let the car start without an electronic key inserted in some sort of device.
At any rate, I attempted to unlock the doors to my vehicle today, but the alarm would not sense the signal from my Viper keychain. The battery on the keychain was just recently changed, so I know that isn't the problem. We just had a heavy rain storm, and I saw some condensation inside my vehicle, so I'm thinking this has something to do with it.
I can get into the car by manually unlocking it, but obviously I can't start the car because of the alarm.
Any suggestions? Thanks.
AnswerYour question triggered this
automated responce to a
DEI equipment support inquiry...
Sorry, due to a mutual agreement
between Directed Electronics & myself,
Questions or, support for DEI car alarms,
or remote start/keyless entry systems
will NOT be provided here.
(Please take note of the disclaimer
I posted at the ALLEXPERTS.com site
www.CARPROTECTOR.com )
You can either try www.directed.com or,
take this question to my online 12 volt
installation Technican forum
at www.installsupport.com.
Many of the technicians there can
assist you with this issue.
Good luck.
ALARMTEK
