QuestionI have a prestige alarm system, or atleast i think it is, that is installed on a 99 jeep wrangler. I cant find this "Valet" switch to bypass it but the alarm system is cutting off all power, so i cant even start the vehicle. Any suggestions on what wires to cut to completely remove/disable the alarm sysetem? are there wires going to the fuse bay under the hood or is there a seperate fuse for inside the car. Any suggestions would help. Thanks so much!
Answer:>( Need to find it.
It's a spring loaded or, flip type switch under the dash area
probably.
Then it would be KEY ON, PRESS N HOLD THE BUTTON
UNTIL THE ALARM REACTS, KEY OFF=START THE CAR/RESET.
(if toggle, KEY ON, FLIP SWITCH, KEY OFF=START/RESET)
keep looking or, you will need to extract that alarm
and repair the wiring to Jeep spec. to get it started.
Good luck.
ALARMTEK
CARALARMMAN.COM
