Car Alarms: alarm problems, jumper cables, keyless entry systems

Question
hello i have a 1988 monte carlo with an automate alarm with remote start. i recently had my car painted and the battery drained during the process. i hooked jumper cables up to start my car and with the keys not in the ignition my dash lights came on. they flashed and the car tried starting itself . it wouldn't start though. i tried to auto start it after trying the keys and it started. unfortunately the car drained the battery. i replaced the battery an checked the alternator, which is good. same thing happened, it drained the battery . what can i do? can i dis arm the alarm or could i leave all the wires in place and get a new brain for the alarm? anything u could suggest would be greatly appreciated. thankyou for ur time

Answer
Your question triggered this
automated responce to a
DEI equipment support inquiry...

Sorry, due to a mutual agreement
between Directed Electronics & myself,
Questions or, support for DEI car alarms,
or remote start/keyless entry systems
will NOT be provided here.

(Please take note of the disclaimer
I posted at the ALLEXPERTS.com site
www.CARPROTECTOR.com )

You can either try www.directed.com or,
take this question to my online 12 volt
installation Technican forum
at www.installsupport.com.

Many of the technicians there can
assist you with this issue.

Good luck.

ALARMTEK