Car Alarms: Bulldog Security Car Alarm, valet mode, bmw z3

Question
I recently purchased a 2000 BMW Z3 that has a Bulldog alarm.  I do not know the model.  It was working fine until the other night.  Now when you press either button on the remote it chirps 3 times and does not arm or lock the doors.  I tried replacing the battery in the remote but that did not work.  Any suggestions?  Thanks!

Answer
Sounds like service mode.
Ok, try this.
Put the key in the ignition, and turn forward
all the way just before cranking. Then within
5 seconds, press and hold in the valet/overide
button, found under the dash area, usually to the
left of the leg drilled into a hidden away spot,
until the installed LED (the blinking light)
in your dash area goes off, and the siren chirps twice.
(Your valet switch might be the toggle (on/off) type.
in this case, key on, flip switch in oposite direction,
key off.)

This should reset the alarm.

Just Repeat these steps to place it
back to valet mode.

That should do it.
Let me know what happens.

ALARMTEK
INSTALLSUPPORT.COM