Car Alarms: valet/overide button - Toyota 4Runner 2001, toyota 4runner, chirps

Question
valet/overide button

Dear Sir,

This button came off and now lost.  The battery was dead and I gave a boost and My alarm is going off all time now and cannot start.  Where can I get another button like this or can I do anything else to turn this off?  It was off and I don't know how it came on.  Would you please email your reply to ?
Thanks a million.
anil
11/3

Answer
Ok then, get over to the local car alarm shop,
or even a Circuit City or Best Buys will
have a valet switch that will fit for your
alarm.

In the mean time, cut off the switch part,
leaving the 2 wires that were connected, free.

Then twist together, turn on the ignition,
hold both wires to ground until the siren chirps.

That should reset and place the alarm into
over ride for now. Nothing accept the keyless entry
if installed will operate until you repeat the
same steps.

Then get a new switch and you're all set.

Have a good day.
Let me know if you were
successful.

ALARMTEK
CARALARMZ.COM