Car Alarms: please help!!!, valet mode, mercury cougar

Question
i got a mercury cougar 99 and my alarm doesn't work at all. when i locked it should turn on and off the lights and play the horn right? to know its already locked that how it was working, now when i locked it doesn't work even i tested when am inside the car and when forgot something in the alarm doesn't work sometimes i don't used the key i just put my hand through the window and ill opened and it wont horned, turn the lights on/off neither! what can i do?


Answer
It appears from your expaination, that the
after market car alarm is in service mode.

Ok, try this.
Put the key in the ignition, and turn forward
all the way just before cranking. Then within
5 seconds, press and hold in the valet/overide
button, found under the dash area, usually to the
left of the leg drilled into a hidden away spot,
until the installed LED (the blinking light)
in your dash area goes off, and the siren chirps twice.
(Your valet switch might be the toggle (on/off) type.
in this case, key on, flip switch in oposite direction,
key off.)

This should reset the alarm.

Just Repeat these steps to place it
back to valet mode.

That should do it.
Let me know what happens.

ALARMTEK
INSTALLSUPPORT.COM