Car Alarms: 98 saab security alarm, valet mode, dash area

Question
QUESTION: I have a 96 saab 900.  The security alarm went off and now the car won't start.  How do I reset the system to get the car started.  Thanks

ANSWER: To try to disarm it,
look under the dash area for a button or,
a toggle switch. When you locate it, turn on the
ignition key, press and hold in the button (little
spring loaded micro button, red or black possibly)
until the alarm chirps 1 time. This should over ride
the system, and only the keyless entry part,
if installed, would still be operating.
The LED (light emiting diode) light in the dash
should also go on solid.=VALET/OVERIDE

This stops the alarm except for the keyless
entry if installed. Once in Valet mode,
it will allow the car to start and operate
like there was no alarm at all.

The next step is if wanting to remove it,
you contact a local technician to
locate it, and affect neccesary service
for you.

That should solve the troubles.

Let me know what you discover.

ALARMTEK
CARALARMMAN.COM

---------- FOLLOW-UP ----------

QUESTION: I couldn't find the override button.  Could it be anywhere besides under the dash?  I looked for any kind of little button and couldn't find on that was obvious.

Answer
Most installers would place it under the dash area where
it was NOT obvious. If it is a remote starter as well,
there could be an antenna on the window glass.

In the antenna could also be a valet button, but if none
is evident, then you will need to visit a tech, or
call for a mobile installer for car alarms so he can
inspect, evaluate and offer repairs or replacement equip.
if required to get back to a system that works
for YOUR security needs.

A.