Car Alarms: honda alarm, valet mode, resident technicians

Question
QUESTION: I just bought a 94 del sol and it has an original dealer installed alarm system. I am interested in obtaining operating instructions. The local dealer couldn't help. It has a red L.E.D. on the colum, a button under the dash and a module under the seat.

ANSWER: Ok, turn on the
ignition key, press and hold in the button
until the alarm chirps 1 time.

This should over ride the system, and only the
keyless entry part, if installed, would still
be operating.

The LED (light emiting diode) light in the dash
should also go on solid.=VALET/OVERIDE

This stops the alarm except for the keyless
entry if installed. Once in Valet mode,
it will allow the car to start and operate
like there was no alarm at all.

The next step is if wanting to remove it,
you contact a local technician to
locate it, and affect neccesary service
for you.

That should solve the troubles.

Let me know what you discover.

ALARMTEK
CARALARMMAN.COM

---------- FOLLOW-UP ----------

QUESTION: Thanks for the quick reply, I am not having any trouble with the car but there are several switches on the alarm module and there is no keyless entry so I am just wanting to know how to get the operating instructions.   
         Mike

Answer
That's hard to say. Without the original remote (s)
to help identify what you have, it would
be difficult to determine what company,
how to control it, etc....

If you would like, restate this question in my installers
forum at www.installsupport.com and see if
my resident technicians there can assist
with this subject.

Good luck there.

ALARMTEK
CARALARMMAN.COM