Car Alarms: Replaced car battery now alarm wont turn off, resident technicians, texalarm

Question
The car battery was empty so I had to take out the car battery andrecharged it.
The next day I connected the battery and than my alarm went off. It's a texalarm FAVA52 (also known as AV-2980). I tried the off button on my remote handset, but it did not respond to it.
In the manual of the car alarm there was a reset way if you still have special "codecard". I don't have it and the previous owner also don't have it.I was thinking of disconnect the car alarm. The alarm was connected by one blok with 22pins. Now it still won't start.
Is there a way to bypass the whole alarm so I can start the car again. Can I maby put current on a particular wire so the start engine will work again. thx

Answer
On this one, the best thing here is
to go to my installers forum at
www.installsupport.com and see if
my resident technicians there can assist
with this project.

I unfortunately don't know the
system you are working with to advise
you properly on it's functions,
features or trouble shooting
information. Better to check with a tech
that might.

Good luck there.

ALARMTEK
CARALARMMAN.COM