Car Alarms: Disable Car Alarm, valet mode, chevy suburban

Question
I have a 1995 Chevy Suburban and was bought second hand.  The car alarm was evidently put in after the original owners bought it from the dealer.  Just recently, I had to change my car battery and that reset my car alarm.  It would go off just about every time I went to (manually) unlock my vehicle.  I was always able to correct the problem but all of a sudden, it is not allowing me to disable it with the remote.  Therefore, my vehicle will not start now.  Please tell me what I need to do.

Thank you.

Answer
Ok, to try to disarm it,
look under the dash area for a button or,
a toggle switch. When you locate it, turn on the
ignition key, press and hold in the button (little
spring loaded micro button, red or black possibly)
until the alarm chirps 1 time. This should over ride
the system, and only the keyless entry part,
if installed, would still be operating.
The LED (light emiting diode) light in the dash
should also go on solid.=VALET/OVERIDE

This stops the alarm except for the keyless
entry if installed. Once in Valet mode,
it will allow the car to start and operate
like there was no alarm at all.

The next step is if wanting to remove it,
you contact a local technician to
locate it, and affect neccesary service
for you.

That should solve the troubles.

Let me know what you discover.

ALARMTEK
CARALARMMAN.COM