Car Alarms: mits montero car alarm, valet mode, dash area

Question
we have a 2001 mits montero and the alarm goes off at various random times and we would like to disconnect it
Can you tell me how to do it?
Thank you.

Answer
It's likely to be an after market system.

To try to disarm it,
look under the dash area for a button or,
a toggle switch. When you locate it, turn on the
ignition key, press and hold in the button (little
spring loaded micro button, red or black possibly)
until the alarm chirps 1 time. This should over ride
the system, and only the keyless entry part,
if installed, would still be operating.
The LED (light emiting diode) light in the dash
should also go on solid.=VALET/OVERIDE

This stops the alarm except for the keyless
entry if installed. Once in Valet mode,
it will allow the car to start and operate
like there was no alarm at all.

The next step is to remove the alarm.
This might require a local technician to
identify it, and affect neccesary service for you.

That should solve the troubles.

Let me know what you discover.

ALARMTEK
CARALARMMAN.COM