QuestionAgain, 1991 Buick lesabre 4 door custom. I want to wire in the Starter disabler relay... but relayhelp.com starter disabler page is "missing/cant be found/page 404 error" i saw the hard wire starter kill. is it the same? or different? i dont want to cut any wires unless i have to to wire this in.
also if i connect it to the tan wire on the brass door trigger at the drivers door shouldn't it also operate for all the other doors? or no? or should it be connected to the white one to operate all 4 doors.
On the dome light, i tried it before but it didn't work.... dome lights work off of white wire from door pin. so if i connect the dome light supervision it should light all of the lights when i unarm the car. correct? last time i tried it only lit one bulb and barely light it at all.
Thanks in advance, James
P.S. i gotta go buy the relays for the door locks, anyplace i can pick them up off the shelf locally without haveing to be an alarm installer???
Answer Pretty involved
to go into here so please, if you
would, restate this question in my installers
forum at www.installsupport.com and see if
my resident technicians there can assist
with this project.
They can go into a more detailed assistance
you might need on this project.
Good luck there.
ALARMTEK
CARALARMMAN.COM
