Car Alarms: 2004 hyundai elantra alarm, 2004 hyundai elantra, hyundai elantra

Question
how do i disconnect the alarm on my 2004 hyundai elantra as quick as i can, all  i have is the  key since my remote was stolen and i need to get the car to hyundai to get a new   alarm

Answer
It's likely to be an after market system.

To try to disarm it,
look under the dash area for a button or,
a toggle switch. When you locate it, turn on the
ignition key, press and hold in the button (little
spring loaded micro button, red or black possibly)
until the alarm chirps 1 time. This should over ride
the system, and only the keyless entry part,
if installed, would still be operating.
The LED (light emiting diode) light in the dash
should also go on solid.=VALET/OVERIDE

This stops the alarm except for the keyless
entry if installed. Once in Valet mode,
it will allow the car to start and operate
like there was no alarm at all.

The next step is to either remove the
impact/shock sensor or, try to turn it down.
This might require a local technician to
identify it, and affect neccesary service for you.

Repeat steps to put into user mode.

That should solve the troubles.

Let me know how it goes.

ALARMTEK
CARALARMMAN.COM