Car Alarms: pursuit pro oe4bs car alarm system, car alarm system, valet mode

Question
the alarm in on and the remoe wont unlock the doors and disarm the security i no there is one way to bypass the alarm, my dad works for a gm dealership and i got it form there though the guy that put the alarms in all used cars but i cant reach him.... i need to know how to reset alarm system and set the other remote can u hlp me. the car wont start because the alarms been tripped

Answer
To try to disarm it,
look under the dash area for a button or,
a toggle switch. When you locate it, turn on the
ignition key, press and hold in the button (little
spring loaded micro button, red or black possibly)
until the alarm chirps 1 time. This should over ride
the system, and only the keyless entry part,
if installed, would still be operating.
The LED (light emiting diode) light in the dash
should also go on solid.=VALET/OVERIDE

This stops the alarm except for the keyless
entry if installed. Once in Valet mode,
it will allow the car to start and operate
like there was no alarm at all.

The next step is to remove the alarm.
This might require a local technician to
identify it, and affect neccesary service for you.

That should solve the troubles.

Let me know what you discover.

ALARMTEK
CARALARMMAN.COM