QuestionI have a 2004 chevy malibu and whenever the theft system light is flashig my car won't start. Sometimes it won't start for days. I do not see a reset button and I don't have the owner's manual. Is there any way for me to reset the alarm or disarm it. Thanks!
AnswerHey , I get this one a whole lot
(as you probably have read.)
This is the most asked question these
days and yes, there is a solution that
will not cost you an arm and a leg.
Of course, & unfortunately, yes this
vehicle has a the PASSLOCK II key
based engine disabling system that is waring out
from use over time. The troublesome device is in
ALL 98+ GM vehicles, and yours is no exception.
To get around this, you will require a
GM IB-IM-PLJX bypass module to circunvent it and
KEEP IT THAT WAY!
A bypass is required to interupt PASSLOCK for
remote start applications. It is done by
grounding the system to allow it to start,
then re establish it for security usage.
This Passlock Bypass Module is designed to provide
a proper coded pulse to open the fuel rail
passlock injector cut off circuit.
The output from an alarm/remote starter
would then shut down the pulse, once it has detected
the engine has engaged, and preserve the integrity
of the passlock system.
That is it's designed purpose.
This is a self learning, resistor sensing
and self adjusting module. Once the VATS/PASSLOCK
wires have been tapped,
you would press the program button to learn,
and it does. The car should then allow start
with any hardware store key.
Copy cut n paste the following payment link:
https://www.paypal.com/xclick/business=installsupport%40aol.com&item_name=1-GM+IB-IM-PLJX+PASSLOCK+BYPASS+MODULE&item_number=1-GM+IB-IM-PLJX+BYPASS&amount=69.95&no_note=1¤cy_code=USD
if you want to buy yours now,
or, go to the site link below to learn more
about your truck's system, and buy the
appropriate unit there.
Regards,
Robert Martin-ALARMTEK/CEO
Master Technician
Mobile Security Electronics
www.PASSLOCK2.com
