Car Alarms: factory alarm for 1995 eclipse, valet mode, impact shock

Question
how do i reset the factory alarm?  headlights flashing, dash flashing, siren, security lights flashing.

Answer
To try to disarm it,
look under the dash area for a button or,
a toggle switch. When you locate it, turn on the
ignition key, press and hold in the button (little
spring loaded micro button, red or black possibly)
until the alarm chirps 1 time. This should over ride
the system, and only the keyless entry part,
if installed, would still be operating.
The LED (light emiting diode) light in the dash
should also go on solid.=VALET/OVERIDE

This stops the alarm except for the keyless
entry if installed. Once in Valet mode,
it will allow the car to start and operate
like there was no alarm at all.

The next step is to either remove the
impact/shock sensor or, try to turn it down.
This might require a local technician to
identify it, and affect neccesary service for you.

Repeat steps to put into user mode.

That should solve the troubles.

Let me know how it goes.

ALARMTEK
CARALARMMAN.COM