Car Alarms: 2001 Lincoln Continental Alarm, lincoln continental, alarm functions

Question
I followed your instructions to the letter to dis-arm my 2001 Lincoln Alarm system.  I pushed the door lock button on the driver's door and closed the door.  20 or so minutes later I unlocked the door with the key and the horn sounded off.  To stop the racket, I put the key in the ignition and turned it to the on position.  Looks like your fix didn't work.  What's UP??

Answer
Ok, then it's a factory alarm malfuntion.

Get out some basic install tools or get
a friend or a good technician
in there to do this.

Normally, you would insert the key in
the drivers door, turn left, then right
to disarm and reset it. Yours was reset.
Try key in the drivers door, turn left, then
right to diasrm and unlock. If no joy,
you can disable it for good by doing the
following:

The FACTORY ALARM DISARM WIRE IS
dk. green/purple |-| in the drivers door module.
The drivers door module is located in the drivers
door and is attached to the door switches

Once Located, splice into this wire with
a simular guage wire, and put it to
a solid chassis ground. This terminates
the OEM alarm functions entirely.

Try that and let me know.

RM-ALARMTEK
CARALARMMAN.COM