Car Alarms: 98 camaro base car alarm, valet mode, dash area

Question
After i lock my car with the remote after 20 secs the car alarm starts beeping and when I press the lock button again it stops. It does this every time i lock my car. Does anyone know what I should do.

Answer
To try to disarm it,
look under the dash area for a button or,
a toggle switch. When you locate it, turn on the
ignition key, press and hold in the button (little
spring loaded micro button, red or black possibly)
until the alarm chirps 1 time. This should over ride
the system, and only the keyless entry part,
if installed, would still be operating.
The LED (light emiting diode) light in the dash
should also go on solid.=VALET/OVERIDE

This stops the alarm except for the keyless
entry if installed. The next step is to
either remove the alarm or, try to identify,
and get new remotes for it.

But once in Valet mode, it will allow the car
to start and operate like there was no
alarm at all. Repeat steps to put into user
mode.

ALARMTEK
CARALARMMAN.COM