Car Alarms: remotestart, infinity fx35, controller area network

Question
remotestart on 2004 infinity fx35 with factory alarm not responding,ignition is on but no crank what can be done?

Answer
This car needs a bypass module for the ignition.

There are 2 choices
1 requires a spare coded ignition key to
operate:

The CRIMESTOPPER
Universal Transponder Bypasskit w/selectable key windings  
TBKV is the latest universal transponder bypasskit intended to keep pace with advances implemented by the car manufacturers. TBKV has features to select the optimum RFID pick up sensitivity and modify the method used to transmit to the factory transceiver. TBKV has selectable windings to tune bypasskit to the same frequency as the factory immmobilizer system & a latching input & keysense input to prevent the immobilizer from detecting multple RFID at the same time.
=34.00

the other:

XK07 - Programmable Platform#07: CAN High Speed Vehicle Interface
Firmware: PKN3 3.00
XK07 is a programmable High Speed CAN Controller platform designed to interface with vehicles equipped with a High Speed Controller Area Network.
=80.00

But one or the other would be needed to use a remote starter here.

ALARMTEK
BYPASSMODULES.COM