Car Alarms: Remote is not working properly, alarmtek, indicator light

Question
I have an after factory car alarm and keyless entry. It has been working fine, then all of a sudden, the car started chirping 4 chirps every 2 minutes.  I thought it was the battery in the remote running low, so I replaced the battery.  When I put the battery in the remote the indicator light is staying solid and I still get the 5 chirps and the remote would not work.  I disconnected the neg cable on the car battery.  Now the remote will lock and unlock the car, no more chirps, but the light is staying on on the remote.  I know that it is draining the new battery.  I also put a new battery in a second remote and the light on it stays solid also.  Please advise????

Answer
The remote seems to be broken, and is
generating a constant signal.

Keep it powered down, and see if the alarm is still
affected. If not, then it's something else.

If it's the remote, get another (try sales@tampacaralarms.com)
But that's what it sounds like from your explaination.

I hope this was helpful.

ALARMTEK