Car Alarms: passlock2 bypass, passlock bypass, gm pickup

Question
Hi
I have a 2002 GM pickup with passlock2 and it keeps preventing me from starting the truck. At first I would have to wait 10 min then it would start now its days at a time. I need my truck and want to permanently bypass this how can I do this. Any help would be great.
PS I know if I permanently bypass the passlock I will lose the anti theft feature but I don't care, if I can't start it is no good to me!

Answer
Unfortunately, yes this
vehicle has a the PASSLOCK II key
based engine disabling system, and will require a
GM PLJX bypass module.

A bypass is required to circumvent for remote start applications.
If left unchecked, it will lock down the fuel injector
rail, and you will then need to
tow it in to GM for evaluation, and resetting.

This Passlock Bypass Module is designed to momentarilly
allow the engine to remote start by sending a proper
coded pulse to open the fuel rail passlock injector
cut off circuit.

The output from an alarm/remote starter
would then shut down the pulse, once it has detected
the engine has engaged, and preserve the integrity
of the passlock system.

That is it's designed purpose.

This is a self learning, resistor sensing
and self adjusting module. Once the VATS/PASSLOCK
wires have been tapped,
you would press the program button to learn,
and it does. The car should then allow start
with any hardware store key.

Copy cut n paste the following payment link:

https://www.paypal.com/xclick/business=installsupport%40aol.com&item_name=1-GM+PLJX+PASSLOCK+BYPASS+MODULE&item_number=1-GM+PLJX+BYPASS&amount=59.95&no_note=1¤cy_code=USD

if you want to buy yours now,
or, go to the site link below to learn more
about your truck's system, and buy the
appropriate unit there.

Regards,

Robert Martin-ALARMTEK/CEO
Master Technician
Mobile Security Electronics
www.PASSLOCK2.com