Car Alarms: Car Alarm Override, tow truck driver, nissan frontier

Question
I have a 2000 Nissan Frontier and unfortunately I have lost my remote to set the alarm and open the doors.  I have not used the alarm in sometime and now the battery is dead and the tow truck driver was unable to jump start the truck as the alarm continued to go off. The dealer is closed until Wednesday and I need my car for work tomorrow. My options please!

Answer
Gotcha, let's put it into valet/service mode,
and try to reset the alarm to default mode.

Look under the dash area for a button or, a toggle
switch. When you locate it, turn on the ignition
key, press and hold in the button (little
spring loaded micro button, red or black possibly)
until the alarm chirps 1 time. This should over ride
the system, and only the keyless entry part,
if installed, would still be operating.
The LED (light emiting diode) light in the dash
should also go on solid.

At this point. the alarm would have reset.
If this had a starter kill relay installed,
it would now be opened, and the engine would
turn over when tried.

You would repeat these steps to go back to
user mode to see if this was corrected.

Let me know if it works for yours.

ALARMTEK
INSTALLSUPPORT.COM