Car Alarms: lost alarm fob, car wont start, dash area

Question
hi i was wondering if you could helpin me out by giving some advice on what to do. a friend of mines had lost his car keys along with his alarm fob but he had sum spare keys but not a fob. the problem now is that car wont start and each time you cobnnect battery the alarm goes off. i was wondering whats the best way out of this situation to bypass disengage the alarm in order to star car. the alarm fitted is a toad and the 6 siren model if have any solution  to tjis matter then please do let me knw many thanx (RIZ)

Answer
You'll need to set off the alarm for a few seconds.
Then, look under the dash area for a button or, a toggle
switch. When you locate it, turn on the ignition
key, press and hold in the button (little
spring loaded micro button, red or black possibly)
until the alarm chirps 1 time. This should over ride
the system, and only the keyless entry part,
if installed, would still be operating.
The LED (light emiting diode) light in the dash
should also go on solid.

At this point. the alarm would have reset.
If this had a starter kill relay installed,
it would now be opened, and the engine would
turn over when tried.

You would repeat these steps to go back to
user mode to see if this was corrected.

But if it does work, I'd keep it this way, and
replace the alarm asap with one you know and
understand how it operates for the best overall
experience.

Let me know if it works for yours.

ALARMTEK
INSTALLSUPPORT.COM