Car Alarms: 97 eclipse after market alarm wont stop goin crazy, dash area, little spring


Question
hi, i hope you can help me on this, i just recently, about a month now, got a
this car as a gift, and when i started to use it, it was fine, up until one day, it
just wouldnt start , so i thought it was the starter, but my friend me told me
otherwise that i might be the alarm, last night was the worse, as soon as i
unlocked the caR, I HAPPEN TO PULL THE LATCH OF the door at the same
time, and it set the alarm off and it wouldnt stop for 5 mins, and i seriously
doesnt not have a clue how to stop it, i yanked the connection to the battery
herlp, what can i do next, i have to work a few hours from now......

Answer
Ok, you'll need to set off the alarm for a few seconds.
Then, look under the dash area for a button or, a toggle
switch. When you locate it, turn on the ignition
key, press and hold in the button (little
spring loaded micro button, red or black possibly)
until the alarm chirps 1 time. This should over ride
the system, and only the keyless entry part,
if installed, would still be operating.
The LED (light emiting diode) light in the dash
should also go on solid.

At this point. the alarm would have reset.
If this had a starter kill relay installed,
it would now be opened, and the engine would
turn over when tried.

You would repeat these steps to go back to
user mode to see if this was corrected.

But if it does work, I'd keep it this way, and
replace the alarm asap with one you know and
understand how it operates for the best overall
experience.

Let me know if it works for yours.

ALARMTEK
INSTALLSUPPORT.COM