Car Alarms: dodge alarm, valet mode, dash area

Question
I have a 97 dodge ram with a factory alarm both keypads are broken and i was just wondering if their is a way to turn off the alarm or completley disable it

Answer
It's an after market system from your description.
Probably dealership installed when
it was purchased originaly.

To start, look under the dash area for a button or,
a toggle switch. When you locate it, turn on the
ignition key, press and hold in the button (little
spring loaded micro button, red or black possibly)
until the alarm chirps 1 time. This should over ride
the system, and only the keyless entry part,
if installed, would still be operating.
The LED (light emiting diode) light in the dash
should also go on solid.=VALET/OVERIDE

This stops the alarm except for the keyless
entry if installed. The next step is to
either remove the alarm or, try to identify,
and get new remotes for it.

But once in Valet mode, it will allow the car
to start and operate like there was no alarm at all.

Let me know how it goes.

ALARMTEK
CARALARMMAN.COM