Car Alarms: programming spare remote, tn magna, valet mode

Question
Hi, I bought a second hand Mitsubishi TN Magna which has a Hornet 300 alarm system installed. It came with 2 remotes (DEI 471T 434mhz). Only one actually worked with the system, the spare one works but will not operate the alarm, I have had it checked and was told that it should work but I would need to programme it to the alarm system. I have now lost the good remote so I do not have a working remote. Could you please tell me how to programme my spare other and where can i get a spare (Melbourne Australia). Please remember I do not have a working remote and I have put the car in valet mode via the ignition key. Would it be possible to get an installation manual for this alarm. Thanks Paul (Urgent)


Answer
THIS IS AN AUTOMATED RESPONSE TO YOUR INQUIRY
ABOUT "VIPER" QUESTIONS, OR "PROGRAMMING"
TRANSMITTERS.

Unfortunately, you must have missed the
note I left at ALLEXPERTS.com about this.
As it said clearly on the website:

"PLEASE TAKE NOTE!!
I do not provide remote transmitter
programming information here!"

I will double check to make sure the
note is still there or, needs to be enlarged
so my visitors will actually read it.

So, if I am mistaken, my sincere apollogies.

Please try a site like www.keylessride.com.
www.remotesunlimited.com , or www.remotes4you.com ,
or even the service department at your local
vehicle dealership.

Good luck with it.

ALARMTEK
CARPROTECTOR.com