Car Alarms: RKE module installation, module switch, head quarters

Question
I'm trying to install this into my '02 4x4, 4DR Blazer:
http://www.commandoalarms.com/CS30manual.pdf

It's replacing this(RKE-845):
http://www.crimestopper.com/techweb/InstructionBooks/Alarm/cs845_855_1_ins_ops.p...
I'm don't know if the old module worked or not, but the only wires it had to connect to the new module were:
10-pin socket: RED, WHITE, BLACK, GREY

3-pin socket: BLUE, RED, GREEN for lock switches:
http://www.commandocaralarms.com/powerlockpos.asp?

I could connect all the wires into the new module except the RED wire from the 3-pin(the new CS-30 plug didn't have a RED wire to splice, only blue and green).

I got it plugged in, it appeared to program and the internal module switch would activate but the solenoids would not cycle the locks(basically, doesn't work). All I need is the RKE function. Is it because of the RED wire that's not hooked up? Sorry to ask, but I couldn't test the red wire, I'll have to buy some specialized parts for it.  Thanks!

Answer
Please re-write this question to
ryan@slickcar.com (commando car alarm technical support department direct)
and ask this of him.

He is the technical
support guy at they're head quarters in Lauderdale,
and will be happy to help.

Good luck.

ALARMTEK
CARALARMZ.com