Car Alarms: lcd remote, dome light, chirps

Question
Ijust install Scytek Astra 777 and I 2 issue. I can arm my system with lcd remote but will not disarm. Work fine with other non pager remote. Issue 2 arms and give 1 chirp and then 4 chirps detecting bad sensor or open circuit. The pager indicates door fault but it set off alarm when I arm the system open either door. I have a power window module that was with my old system and that work properly. Any suggestions.

Answer
Doubtfull the window mod is the trouble.
The alarm is detecting an open door circuit, so that
needs to be repaired. This usually means
the wrong door trigger wire was used, and it's
reporting the same, or there is a delay on the dome
light circuit, and the alarm needs to be set to
ignore the last door arming for 1 minute to allow
for the delay on the light to go off.

The alarm not disarming tells me the ignition wire is incorrect as well.
I strongley suggest you get the wiring
chart for your car from the people you bought
the alarm from, and trouble shoot the issues
you have.

Good luck.

ALARMTEK