Car Alarms: anti-theft, power locks, steering column

Question
I believe that the anti-theft is not allowing me to start my car. On the way to work I heard the power locks on all doors snap and after I shut it off it will not start. Any help?
It is a 1992 infinity G20

Answer
Normally, you would insert the key in
the drivers door, turn left, then right
to disarm and reset it. If yours is malfunctioning,
you can disable it for good by doing the following:

The FACTORY ALARM DISARM WIRE IS
green/yellow |-| at the theft warning module
located under dash by the steering column.

Once Located, splice into this wire with
a simular guage wire, and put it to
a solid chassis ground. This terminates
the alarm functions entirely.

However, at this point, this car would be exceedingly
easy to steel, so I suggest you get an aftermarket
alarm system to protect it from here on in.

Have a good day.

ALARMTEK
CARALARMSTORE.com