Car Alarms: programing 2002 Dokota ignition Key, cabo san lucas mx, cabo san lucas

Question
I am in Cabo San Lucas MX. I am going to drive 120 miles to get a blank transponder key for my 2002 Dakota. They want to double the cost of the key($200 usd) to program it so it will start my dakota. I guess I have no choice about the key but could you provide programing instructions for the new key .I only have one transponder key currently that will start the truck
Thanks
Robin

Answer
There is a way.
You make the ignition code reader think the smart
key is in the ignition at all times.
This keeps the system from arming.

To make it happen, print the following
and give it to your technician:

Go get 2 non transponder keys cut at
the hardware store for 3 bucks each.  
Get a universal bypass module
(key-in-a-box style)
at www.PASSLOCK1.com for 25.00.

Then wrap the coil around the key cylinder,
secured in place with hot-glue. Connect the
status input wire to chassis ground and the
positive to ignition...no more transponder
key required. No Smart Key security issues.

The total cost on this is
substantially less than what a dealership
would charge to replace and reprogram keys
all the time.

This is what will work instead of the dealerships
profit margin.

Tell them to overcharge someone else!

ALARMTEK
ALARMTEK.net