Car Alarms: car alarm wont turn on, valet service, action mode

Question
Saturday,someone tried to break into my truck and they popped out the key hole in the door.So I went to take off the door panel to put it back in and then put it back togther then the chapman alarm did not turn on.What did I do wrong.than you

Answer
Hard to say. Please try to fisrt make certain
all wiring, connectors etc... are connected
from the door to the inside of the car.

Then attempt to reset the valet/service mode
on the Chapman as per the instructions in your manual
so it goes back into user or action mode.

If you don't know how that's done, read some of
my postings on reseting or Valet overide & try
to apply to yours.

Good luck.

ALARMTEK