Car Alarms: disable car alarm on 1993 Toyota Pickup, valet service, dash area

Question
Hi,
I wanted to know how to disable my aftermarket car alarm since I don't have a remote. The alarm went off on it's on and my truck won't start. the alarm hasn't worked in years and today it went off after a car honked right behind me as I was getting ready to enter my truck.

thank you

Answer
Gotcha, let's put it into valet/service mode,
and try to reset the alarm to default mode.

Look under the dash area for a button or, a toggle
switch. When you locate it, turn on the ignition
key, press and hold in the button (little
spring loaded micro button, red or black possibly)
until the alarm chirps 1 time. This should over ride
the system, and only the keyless entry part,
if installed, would still be operating.
The LED (light emiting diode) light in the dash
should also go on solid.

At this point. the alarm would have reset.
If this had a starter kill relay installed,
it would now be opened, and the engine would
turn over when tried.

You would repeat these steps to go back to
user mode to see if this was corrected.

Let me know if it works for yours.

ALARMTEK
INSTALLSUPPORT.COM