Car Alarms: car alarm remote broke but need to get home, valet service, dash area

Question
My car alarm remote for my Sidewinder alarm system broke and now i can get into my truck with the key but cannot start it.I can't afford to get a new remote right now but i need to drive my truck like asap how can i get the alarm disabled so i can just use the key to lock it and unlock it from now on until i get a new remote????please help

Answer
Gotcha, let's put it into valet/service mode,
and try to reset the alarm to default mode.

Look under the dash area for a button or, a toggle
switch. When you locate it, turn on the ignition
key, press and hold in the button (little
spring loaded micro button, red or black possibly)
until the alarm chirps 1 time. This should over ride
the system, and only the keyless entry part,
if installed, would still be operating.
The LED (light emiting diode) light in the dash
should also go on solid.

At this point. the alarm would have reset.
If this had a starter kill relay installed,
it would now be opened, and the engine would
turn over when tried.

You would repeat these steps to go back to
user mode to see if this was corrected.

Let me know if it works for yours.

ALARMTEK
INSTALLSUPPORT.COM