Car Alarms: Car alarm for 1998 Oldsmobile Bravada, valet mode, oldsmobile bravada

Question
I have a 1998 Oldsmobile Bravada and yesterday my cousin was switching my stereo and then suddenly it stopped working. I got out of my car and then when I came back I remembered that my alarm didn't beep when I left and activated it. The doors did lock, but my windows didn't roll up, like they normally do, b/c the alarm activates the window roll up. I went into my car and also noticed that the blue alarm LED light that usually blinks was on steady. I called my stepfather and he said somehow my valet mode had been activated. I don't remember pushing anything and I don't know where in the wheel area of my truck that the valet mode would be located. :(

Answer
Should be no problem really.
It appears from your expaination, that the
car alarm is in service mode.

Ok, try this.
Put the key in the ignition, and turn forward
all the way just before cranking. Then within
5 seconds, press and hold in the valet/overide
button, found under the dash area, usually to the left of the leg drilled into a hidden away spot,
until the installed LED (the blinking light)
in your dash area goes off, and the siren chirps twice.
(Your valet switch might be the toggle (on/off) type.
in this case, key on, flip switch in oposite direction,
key off.)

This should reset the alarm.

Just Repeat these steps to place it
back to valet mode.

That should do it.
Let me know what happens.

ALARMTEK
INSTALLSUPPORT.COM