Car Alarms: Factory Car Alarm, chrysler town and country, chrysler town and country van

Question
I own a 2000 Chrysler Town and Country Van.Recently I have been experiencing a problem with the security alarm going off for no reason at all.Before I take it to a dealer I would like to know if you have any suggestions of something that I can try!I cannot lock the doors because then the alarm arms its self.

Answer
If it's arming itself, it's probably an aftermarket
alarm. I don't know of any factory alarms that do that.

Ok, let's put it into valet/service mode.

Look under the dash area for a button or, a toggle
switch. When you locate it, turn on the ignition
key, press and hold in the button (little
spring loaded micro button, red or black possibly)
until the alarm chirps 1 time. This should over ride
the system, and only the keyless entry part,
if installed, would still be operating.
The LED (light emiting diode) light in the dash
should also go on solid.

This solves the problem for now.

Then if you want to remove it, take it to a local
after market alarm dealer and have it done there.

They may even be able to reset/reprog. the features on
the alarm you have, to allow you to use the system
more comfortably, but of course, your call.

Have a nice holiday.

ALARMTEK
INSTALLSUPPORT.COM