Car Alarms: Acura 1.6 EL aftermarket to stock alarm, spade terminal, starter relay

Question
I had a Compustar CM3300 alarm install a few years back. Just recently the trunk release relay shorted out and my car will not start. I removed the alarm and rewired back to its original wires. I used a spade terminal to connect the starter relay in order to start the car but now the power lock/unlock will not function.

Answer
Odd. simple 3 wire negative type, direct tap door lock
system. I have no idea, other then the wrong wires,
why the locks would not work as they should.

I'd remove the remote starter and start over to
be sure of the installation.

ALARMTEK
WIREWERX.com