Car Alarms: disarm alarm system, car alarm system, valet mode

Question
I have lost my car remote and my battery went dead on my 1992 accura legend.  my question is how can I disarm the alarm system because the car alarm system won't let me start the car.   this is not a factory arlarm system. please help

Answer
Dear Ms. Rita,
   Please get a new battery to start with.
Once the cables are attatched, the alarm
siren should start howling. Then try the
following method to put your alarm into service
or what we call Valet/overide" mode.

To start, look under the dash area for a button or,
a toggle switch. When you locate it, turn on the
ignition key, press and hold in the button (little
spring loaded micro button, red or black possibly)
until the alarm chirps 1 time. This should over ride
the system, and only the keyless entry part,
if installed, would still be operating.
The LED (light emiting diode) light in the dash
should also go on solid.=VALET/OVERIDE

This stops the alarm except for the keyless
entry if installed. The next step is to
either remove the alarm or, try to identify,
and get new remotes for it.

But once in Valet mode, it will allow the car
to start and operate like there was no alarm at all.

Let me know how it goes.

ALARMTEK
CARALARMMAN.COM