QuestionQUESTION: I need to know how to disarm my 1991 jeep limited; you use the passenger side door w/ key but its acting crazy and wont shut off!!!!!!!!!!!! please help
ANSWER: Is it: Headlights flashing, car horn honking
and a worded SECURITY" light in the dash flashing?
Or,
Is it: flashing parking lights,
an LED in the dash area, and a siren
"going off"?
Let me know more on this to better
advise you on a course of action.
Best Regards,
Robert Martin
CEO/ALARMTEK
DELUXESERVICE.com
---------- FOLLOW-UP ----------
QUESTION: The headlights are flashing, the car horn is honking, and a worded security light in the dash is flashing!!!!!
AnswerAlrighty then.
Normally, you would insert the key in
the drivers door, turn left, then right
to disarm and reset it. If yours is malfunctioning,
you can disable it for good by doing the following:
The FACTORY ALARM DISARM WIRE IS
green/orange |-| located
in the driver's kick panel.
Once Located, splice into this wire with
a simular guage wire, and put it to
a solid chassis ground. This terminates
the alarm functions entirely.
However, at this point, this car would be exceedingly
easy to steel, so I suggest you get an aftermarket
alarm system to protect it from here on in.
Have a good day.
ALARMTEK
CARALARMSTORE.com
