Car Alarms: Immoberliser Problems BMW 323I - 1997 - P plate, hot glue, bmw 323i

Question
Hello
The immoberliser on my BMW is playing up, the car has come to a stand still.  I have tried disconnecting the battery etc.  How can I bring the memory back?  If not possible how can I disconnect the immoberliser?  

I look forward to your expert advice.

sam

Answer
There is a way.
You make the ignition code reader think the smart
key is in the ignition at all times.
This keeps the system from arming.

To make it happen, print the following
and give it to your technician:

Go get 2 non transponder keys cut at
the hardware store for 3 bucks each.  
Get a universal bypass module (key-in-a-box style)
at www.REMOTESTARTCENTRAL.com for 25.00.

Then wrap the coil around the key cylinder,
secured in place with hot-glue. Connect the
status input wire to chassis ground and the
positive to ignition...no more transponder
key required. No Smart Key security issues.

The total cost on this is
substantially less than what a dealership
would charge to replace and reprogram keys
all the time.

This is what will work instead of the dealerships
profit margin.

ALARMTEK
ALARMTEK.net