Car Alarms: Autopage 860 question, flashing light, turn signal

Question
I have installed an Autopage 860 alarm in our 1985 Camaro.  Seems to work except when I use the turn signals the doors unlock and keep pulsing to unlock while the turn signal is on.  When the signal shuts off the doors lock again.  Any clue as to which wire I should be checking?    Thanks

Answer
Wrong wires are my first guess.
The second would be if done without
relays, how did you do the locks?

The circuit you are triggering should have
0 affect from the lights.

First I'd remove the flashing light output
you connected, and test. If it stops
doing that, then locate the wire at the switch
that goes on and off when you hit the switch
only half way. That's the parking lights wire.
Sould be brown there. Re connect and test.
My guess it will correct.

Good luck.

ALARMTEK