Car Alarms: 96 CIRRUS Factory alarm, dodge chrysler, posible thanks

Question
Hi I was wondering if you can help with the set up on how to disarm (perm) the factory alarm on my 96 cirrus you guys talk about a relay n resitor to do this, want to know were to buy stuff and wiring help if posible
THANKS
ALBERT

Answer
I sell it all here Albert, however
this one is tricky. The Cirrus is a difficult vehicle
to work on and it can be expensive. If it's an aftermarket
alarm, look at the last few posts to get valet overide
info, and apply.

If it's factory, then it's going to be a surgical
application using relays and resistors. Dodge/Chrysler
is the best place for this, or a good stereo/car alarm
shop.

Here's how to tell one from the other:

HEADLIGHT FLASHING & CAR HORN HONKING
AND THE WORD "SECURITY" OR ANTI-THEFT
IN THE DASH=factory (OEM) alarm
or,
SIREN BLARRING AND PARKING LIGHTS FLASHING WITH
AN LED FLASHING IN THE DASH=AFTER MARKET.

Just hope it's the former, not the latter here
for you wallets sake.

I hope this helps you.

ALARMTEK
CARALARMSTORE.com