Car Alarms: mazda 626 alarm, fuse box, mazda 626

Question
My son just purchased a 1993 mazda 626. Every time he locks the drivers door with the key the horn sounds and the lights flash. Is there anyway to disable this system?

Answer
Normally, you would insert the key in
the drivers door, turn left, then right
to disarm and reset it. If yours is malfunctioning,
you can disable it for good by doing the following:

The FACTORY ALARM DISARM WIRE IS
yel/rd or lt grn/blk|-  |drivers door harness or the
at the factory alarm, built into the fuse box.

Once Located, splice into this wire with
a simular guage wire, and put it to
a solid chassis ground. This terminates
the alarm functions entirely.

However, at this point, this car would be exceedingly
easy to steel, so I suggest you get an aftermarket
alarm system to protect it from here on in.

Have a good day.

ALARMTEK
CARALARMSTORE.com