Car Alarms: start wire????, hot glue, immobilizer system

Question
QUESTION: my question is i have been working in a aud A6 year 2000 i did remote start on this vehicle everthing works fine my problem is with start wire  because on the wire diagram says this car has 2 start wire red/black and blue but  in the ignition switch harnes i only find one the red/black  so its normal  tha doenst have the other?or the blue is locate in another location? im asking because i just get call fron the costumer sayng the car won't start no more cold this be the tach wire? because the wether have change .thanks for all tips

ANSWER: The red/black, and the blue in the ignition
harness off the key should be the 2 you need.
add a positive relay to the starter output from
the alarm, the do both wires, and of course,
the last item is your transmod bypass. I'd re inspect
that. Could have slipped out of position. Try hot glue
to keep it in place.

ALARMTEK



---------- FOLLOW-UP ----------

QUESTION: i do not know  wheres the 2 start wire?its not there on the ignition swith harnes its possible this car has only one start wire?and this car has no bypass on it.im sure doenst have  bypass .because work before.

Answer
According to the notes, it does. You got lucky.
"This vehicle has an immobilizer system that needs to be bypassed when adding remote start.
Use DEI part number 555U (25.00)

12V|red  |+  |ignition harness
STARTER|red/black  |+  |ignition harness   
SECOND STARTER|blue  |+  |ignition harness
IGNITION|black  |+  |ignition harness
ACCESSORY|yellow/black |+  |ignition harness

Sorry, but the notes show something different
then what you have there.