Car Alarms: car alarm in 00dodge intrepid, dodge intrepid, model vehicle

Question
first Q : for this make and model vehicle do u use relays during wiring or resistors? or both?
I have the alarm hooked up but am running into problem the only door that is actually engaging lock is the front driver door the other 3 lock n system is not activating what do I check, thank you b the alarm is a Prestige 2buttonremote securtiy system. model APS-25CH

Answer
You need to pick up two resistors, wire up the system for positive trigger locking with the resistors inline on the output side.

DEI lists this note:
Locks are positive trigger through resistors. Use 2.7K (2700) ohms for lock and 620 ohms for unlock. MUST use relays.