Car Alarms: Car Alarm Trouble, viper alarm system, car alarm system

Question
I bought a 1997 F150 from a guy that has a Viper Alarm System in it.  The alarm seems to go off disabling the whole truck a few minutes after the truck is turned off.  That is fine to me.  I can disable the siren and it won't make noise.  Then I usually use the remote to disengage the system when I get ready to start the truck.  This morning my remote would not disengage the system.  I really just want to do away with the whole system.  How do I uninstall.

Answer
To retrofit this alarm system
I suggest you get the wiring chart
for the vehicle, locate, and remove
each wire, one by one until extracted.

This File Is Available.

I have Checked My Databases &
This Wire Color/Location/Polarity Data Chart
Is Available To Purchase For Only $4.99.

I Do These Requests By Hand, so I get
you the best info for the task at hand.

If You Are Ready To Buy It Using PAYPAL
Or, if Using Your Credit Card, Go To
www.MYWIRES.com and click on the paylink
there.

Once Your Payment Is Received, I Will Compile
The Wiring Data You Require To De-Install Your Aftermarket
Car Alarm System, And Send Back The
Data In An Email To Print Out
To Use To Help Your Installation Project.

Regards

ALARMTEK
WIREWERX.COM