Car Alarms: 93 Nissan Altima factory alarm, nissan altima, altima

Question
How to disable/by pass the factory alarm on 93 Nissan Altima. Car cranks but not starts. The "Security" flashing on the dash, even when I tried to crank the car. Thanks.  

Answer
Normally, you would insert the key in
the drivers door, turn left, then right
to disarm and reset it. If yours is malfunctioning,
you can disable it for good by doing the following:

The FACTORY ALARM DISARM WIRE IS
green/yellow  |- |harness from drivers door.

Once Located, splice into this wire with
a simular guage wire, and put it to
a solid chassis ground. This terminates
the alarm functions entirely.

However, at this point, this car would be exceedingly
easy to steel, so I suggest you get an aftermarket
alarm system to protect it from here on in.

Have a good day.

ALARMTEK
CARALARMSTORE.com